EasyStand Bantam Bedienungshandbuch PDF herunterladen (Seite 21)

Seat Depth Adjustment

1. Prior to adjusting seat depth, make sure the Controller

is in the “Sit-to-Stand” position. The seat should be

lowered to a seated position for easiest adjustment.

2. Loosen the clamp lever on the outer right side of

the seat tube frame underneath the seat. One full turn

should be sufﬁcient.

3. With one hand supporting the back (if equipped)

depress the spring button on the outer left side of the

seat tube underneath the seat. Using the back as a lever,

move the seat depth to the desired setting, noting the

color. If the seat depth does not move freely, check the

seat upholstery at the front of the seat to ensure it can

slide freely with the telescoping seat surface, you may

need to release it from the velcro. Velcro is used to at-

tach it to the front on the unit.

Re-tighten the clamp lever at this time. If the unit is not

equipped with a back, the adjustment is complete. Oth-

erwise continue.

4A &B. To adjust the following arms, loosen each knob

all the way. With one hand supporting the back assembly

ﬂip the red plunger lever in the center of each knob fully

open. Then continue to loosen the knob until resistance

is felt. DO NOT continue to turn the knob counterclock-

wise. Forcing the knob past its stop will damage the

mechanism.

Caution: Make sure to have one hand supporting the

back assembly, ﬂipping the red plunger lever will cause

the back assembly to fall back.

Using the back as a lever, adjust the following arms so

that the color of the seat depth decal are matched in the

indicator window on the following arms (indicator win-

dow as shown).

Release the red plunger levers to re-engage the locking

plungers in the clamp knobs. You may need to partially

tighten the knobs and slightly move the back assembly

to allow the locking pins to engage their “home”

positions. Fully close the red plunger levers and tighten

the knobs securely.

Adjustments & Usage

Page 18

Adjustments & Usage

Read all instructions thoroughly before beginning any adjustments.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

EasyStand Bantam Bedienungshandbuch Seite 21

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein EasyStand Bantam